Corvette V8-5.7L VIN G (1997)
Shifter M/T: Service and Repair
Shift Control Closeout Boot Replacement
REMOVAL PROCEDURE
1. Remove the console.
2. Carefully pry off the shift control knob button.
3. Pry the shift control knob retainer out of the slots and remove the retainer.
4. Unscrew the shift control knob.
5. Grasp the sides of the shift control boot and apply light pressure in toward the shift control lever to begin to release the shift boot retaining tabs
from the I/P accessory trim plate.
6. Using light pressure, continue to release the remaining boot retaining tabs.
