Corvette V8-6.0L VIN U (2005)
Convertible Top Hydraulic Control Unit: Service and Repair
FOLDING TOP PUMP WITH MOTOR REPLACEMENT
REMOVAL PROCEDURE
1. Place the folding top with the #1 and #5 bow in the up position.
CAUTION:
-
Refer to Eye Protection Caution in Service Precautions.
-
Refer to Folding Top Hydraulic Pressure Caution in Service Precautions.
-
Refer to Servicing Electrical Components Caution in Service Precautions.
2. Folding top will bleed down pressure after approximately four minutes of non use.
3. Open the rear compartment.
4. Disconnect the battery.
5. Place a protective covering over the rear compartment interior and the adjacent body panels.
6. Remove the rear compartment side carpet.
7. Locate the hydraulic pump beneath the carpet in the storage compartment on the passenger side of the rear compartment.