Corvette V8-6.2L (2008)
Installation Procedure
1. Connect the electrical connector to the speaker.
2. Position the speaker (2) in the opening in the trim panel.
3. Install the screws (1) securing the speaker to the trim panel.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
Tighten the screws.
Tighten the screws to 2 N.m (18 lb in)
4. Position the tabs on the speaker grill to the slots in the trim panel.
5. Push the speaker grill inward until fully seated against the trim panel.
6. Return the tonneau cover and folding top to their original positions.
