Corvette V8-6.2L (2008)
2. Install the brake caliper to the caliper mounting bracket.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
3. Install the brake caliper guide pin bolts.
Tighten the brake caliper guide pin bolts to 31 N.m (23 lb ft).
4. Remove the plug from the brake caliper opening and the brake hose.
Important: Install NEW copper brake hose gaskets.
5. Assemble the NEW copper brake hose gaskets, and the brake caliper inlet fitting bolt to the brake hose.
6. Install the brake hose and the brake caliper inlet fitting bolt to the brake caliper.
Tighten the brake caliper inlet fitting bolt to 45 N.m (33 lb ft).
7. Bleed the hydraulic brake system. Refer to Hydraulic Brake System Bleeding (Manual) (See: Brake Bleeding/Service and Repair)Hydraulic Brake
System Bleeding (Pressure) (See: Brake Bleeding/Service and Repair) .
8. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (See: Maintenance/Wheels and Tires/Service and Repair) .
9. Lower the vehicle.
Rear Brake Caliper Replacement (J56)
Rear Brake Caliper Replacement (J56)
