Corvette V8-6.2L (2008)
6. Remove the piston (1) from caliper.
7. After the inboard and outboard pistons have been removed, move to the next piston and repeat the clamping procedure until all pistons have been
removed.
8. Using a long medium-bladed screwdriver, remove the dust seal (2) from the caliper body. Use caution as not to damage the caliper.
9. Using a small flat-bladed pocket screwdriver or equivalent, remove the piston seal (3).
Important: Perform the following service procedure only if the brake pipe is damaged.
10. Remove the brake pipe between the inboard and outboard pistons.
Installation Procedure
