Corvette V8-6.2L (2008)
5. Reposition the telescoping column motor assembly to the steering column, if equipped.
6. Install the screw (3) to the motor mounting bracket (5).
Tighten the screw to 7 N.m (62 lb in).
7. Install the instrument panel lower trim panel. Refer to Driver Knee Bolster Panel Replacement (See: Body and Frame/Interior Moulding /
Trim/Dashboard / Instrument Panel/Service and Repair) .
8. Connect the brake booster vacuum hose to the brake booster check valve.
9. Install the master cylinder to the brake booster.
10. Install the master cylinder mounting nuts.
Tighten the master cylinder mounting nuts to 29 N.m (21 lb ft).
11. Connect the electrical connector (1) to the brake fluid level sensor.
