Corvette V8-6.2L (2008)
6. Remove the outlet hose to oil pan bolt (2) and disconnect the hose (3) from the oil pan. Discard the oil seal (1).
7. Remove the oil outlet hose.
Installation Procedure
1. Position the oil outlet hose.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
2. Install the oil inlet/outlet hose bracket bolt.
Tighten the oil inlet/outlet hose bracket bolt to 22 N.m (16 lb ft).
3. Using a new oil seal (1) install the oil outlet hose (3) and bolt (2) to the oil pan.
Tighten the outlet hose to oil pan bolt to 22 N.m (16 lb ft).
