Corvette V8-6.2L (2008)
6. Drain the engine oil. Refer to Engine Oil and Oil Filter Replacement (See: Engine Oil/Service and Repair) .
7. Remove the right front tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (See: Maintenance/Wheels and Tires/Service
and Repair) .
8. Remove the right front wheelhouse rear liner. Refer to Front Wheelhouse Liner Replacement (Rear Liner) (See: Body and Frame/Fender/Front
Fender/Front Fender Liner/Service and Repair)Front Wheelhouse Liner Replacement (Front Liner) (See: Body and Frame/Fender/Front
Fender/Front Fender Liner/Service and Repair) .
9. Disconnect the oil temperature sensor electrical connector.
Important: Anytime the oil tank inlet and outlet hoses are serviced, the oil seals must be replaced.
10. Remove the inlet hose to oil tank bolt (3) and disconnect the hose (2) from the oil tank. Discard the oil seal (1).
