Corvette V8-6.2L (2008)
11. Remove the outlet hose to oil tank bolt (3) and disconnect the hose (2) from the oil tank. Discard the oil seal (1).
12. Remove the oil tank to frame bolts.
13. Remove the oil tank from the bottom of the vehicle.
Installation Procedure
1. Position the oil tank in place from the bottom of the vehicle.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
2. Install the oil tank lower bracket bolts to frame bolts.
Tighten the oil tank lower bracket to frame bolts to 36 N.m (27 lb ft).
3. Using g a new oil seal (1) install the oil tank outlet hose (2) and bolt (3) to the oil tank.
Tighten the outlet hose to oil tank bolt to 22 N.m (16 lb ft).
