Corvette V8-6.2L (2008)
4. Using a new oil seal (1) install the oil tank inlet hose (2) and bolt (3) to the oil tank.
Tighten the inlet hose to oil tank bolt to 22 N.m (16 lb ft).
5. Connect the oil temperature sensor electrical connector.
6. Install the right front wheelhouse liner. Refer to Front Wheelhouse Liner Replacement (Rear Liner) (See: Body and Frame/Fender/Front
Fender/Front Fender Liner/Service and Repair)Front Wheelhouse Liner Replacement (Front Liner) (See: Body and Frame/Fender/Front
Fender/Front Fender Liner/Service and Repair) .
7. Install the right front tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (See: Maintenance/Wheels and Tires/Service
and Repair) .
8. Lower the vehicle.
9. Install the 2 oil tank middle bracket nuts.
Tighten the oil tank middle bracket nuts to 10 N.m (89 lb in).