Corvette V8-6.2L (2008)
Caution: Refer to Vehicle Lifting Caution .
7. Raise the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Service Intervals) .
8. Remove the exhaust intermediate pipe.
9. Remove the floor panel tunnel reinforcement. Refer to Floor Panel Tunnel Panel Reinforcement Replacement (See: Body and Frame/Exterior
Moulding / Trim/Underbody Cover/Service and Repair) .
10. Disconnect the chassis fuel pipe (5) from the underbody retainers (6).
11. Remove the chassis fuel pipe.
Installation Procedure
Important:
*
Follow the same routing as the original pipe.
*
Secure the pipe in order to prevent chafing.
*
Do not kink or bend the pipe.
1. Install the chassis fuel pipe (5) into the underbody retainers (6).