Corvette V8-7.0L (2007)
6. Remove the protective cap on the surge tank upper stud.
7. Remove the surge tank upper nut.
8. Loosen the surge tank side nut.
9. Remove the surge tank.
Installation Procedure
Important: Lubricate the inside diameters of the hoses with clean coolant prior to installation.
1. Install the surge tank.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the upper surge tank nut.
Tighten all nuts to 8 N.m (71 lb in).
3. Install the protective cap on the surge tank upper stud.