Corvette V8-7.0L (2007)
11. Connect the I/P wiring harness retaining clip to the shift control.
12. Connect the shift control electrical connector.
13. Install the I/P accessory trim plate.
14. Install the console.
Important: Prior to restoring battery power, check to be certain that the ignition key is removed from the ignition switch.
15. Connect the negative battery cable.
Tighten the negative battery cable bolt to 15 N.m (11 lb ft).
16. Program the transmitters.
17. Unblock the wheels.
18. Release the parking brake.
Caution: Refer to Road Test Caution.
19. Test drive the vehicle in an area with little traffic; ensure that the transmission will shift smoothly into, and maintain each detent position.