Corvette V8-7.0L (2007)
40. Using ONLY HAND TOOLS, install NEW rear suspension crossmember mounting nuts.
Tighten the rear suspension crossmember mounting nuts to 110 N.m (81 lb ft).
41. Remove the transmission jack from the rear suspension crossmember.
42. Release the J 42055 from the transmission, then remove the J 42055 and transmission jack.
43. Install the transaxle mount (2) to rear suspension crossmember nuts (3).
Tighten the transaxle mount to rear suspension crossmember nuts to 50 N.m (37 lb ft).
44. Connect the wiring harness and brake pipe clip retainers to the rear suspension crossmember.
