Corvette V8-7.0L (2007)
Drive/Propeller Shaft: Overhaul
Driveline Support Overhaul
Driveline Support Overhaul
Tools Required
*
J 2619-01 Slide Hammer
*
J 24420-C Harmonic Balancer Puller
Propeller Shaft Removal
Important: Do not separate the input shaft, propeller shaft, couplings, or bearing housing assembly, unless required. These components
are balanced as an assembly. Disassembly and improper assembly of the components may cause vehicle driveline vibration.
If the input shaft, couplings, propeller shaft, or bearing housing assembly must be separated, the components must be marked prior to
disassembly. During assembly, the components must be returned to their original position and location.
1. Remove the clutch actuator and bolts - manual transmission.
2. Remove the flex plate and bolts - automatic transmission.
3. Remove the access hole plug, if required - automatic transmission.
4. Remove the snap ring (1) from the driveline tube.
