Corvette V8-7.0L (2007)
7. Remove the snap ring (1) from the rear bearing housing.
8. Position the rear bearing housing into a press and remove the bearing (1).
9. Remove the O-rings (1) from the rear bearing housing.
10. Discard the O-rings.
Driveline Support Assembly Cleaning and Inspection
Driveline Support Assembly Cleaning and Inspection
Tools Required
J 7872 Magnetic Base Dial Indicator Set
1. Clean all bolts and bolt holes of threadlocking material.
2. Clean the components in solvent.
Caution: Wear safety glasses in order to avoid eye damage.
3. Dry the components with compressed air.
4. Inspect the hub for the following conditions:
*
Damaged bolt hole threads (1)
*
Damaged snap ring grooves (2)
