Corvette V8-7.0L VIN E (2006)
Headlamp Washer Hose: Service and Repair
HOSE REPLACEMENT - HEADLAMP WASHER
REMOVAL PROCEDURE
IMPORTANT: The headlamp washer hose consists of multiple sections (4), and slide-lock connectors (5), from the pump to the headlamp washers
(1). It may be necessary to work underhood, or inside the front fascia to service the Tee fitting (3), and hose clips (2), if it is necessary to access the
washer solvent container hose.
1. Remove the front wheelhouse.
2. Slide the hose lock connector (4) at the headlamp washer supply hose, and disconnect the coupling.
IMPORTANT: Carefully grasp both fittings of the hose and elbow, to ensure the nozzle is not cracked during removal.