Cruze L4-1.4L Turbo (2011)
6. Connect the power cord to the heater and secure using lock.
7. Install the power cord bracket, P/N 96312504, to the intermediate shaft bracket (1) using the existing bolt.
8. Route the power cord up along the back side of the intermediate shaft and secure the push in retainer (2) to the installed bracket.
9. Lower the vehicle.
10. Secure the power cord clip (1) to the heater hose.
11. Secure the power cord clip (1) to the existing engine harness.
12. Route the power cord along the strut tower and secure the push in retainer (2) into upper hole on strut tower.
13. Route the power cord along the front side of the strut tower and secure the clip (1) to the A/C line. For non-A/C vehicles, secure using the stud