Cruze L4-1.4L Turbo (2011)
Harmonic Balancer - Crankshaft Pulley: Service and Repair
Crankshaft Balancer Replacement
Special Tools
*
EN-470-B - Angular Torque Wrench
*
EN-956-1 - Extension
*
EN-49979 - Crankshaft Shock Mount Retainer
For equivalent regional tools, refer to Special Tools (See: Tools and Equipment).
Removal Procedure
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair).
2. Remove front compartment splash shield right side. Refer to Front Compartment Splash Shield Replacement (See: Body and Frame/Splash
Guard/Service and Repair/Front Compartment Splash Shield Replacement).
3. Fix the drive belt tensioner, remove the drive belt from crankshaft balancer and lay aside. Refer to Drive Belt Replacement (See: Drive Belts,
Mounts, Brackets and Accessories/Drive Belt/Service and Repair).
4. Place collecting basin underneath.
5. Install EN-49979 - crankshaft shock mount retainer to EN-956-1 - extension.
6. Loosen the crankshaft balancer bolt (4) while fixing the crankshaft balancer (3) with EN-49979 - crankshaft
shock mount retainer (1) and EN-956-1 - extension (2).