Cruze L4-1.4L Turbo (2011)
9. Remove the charger air cooler outlet air hose (1) from the charge air cooler (2).
Installation Procedure
1. Install the charger air cooler outlet air hose (1) to the charge air cooler (2).
2. Install the clamp.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Install the charger air cooler outlet air hose bolt (3) and tighten to 8 Nm (71 lb in).
4. Install the front bumper fascia. Refer to Front Bumper Fascia Replacement (See: Body and Frame/Bumper/Front Bumper/Front Bumper Cover /
Fascia/Service and Repair/Front Bumper Fascia Replacement).
5. Install the charger air cooler outlet air hose (3) to the throttle body.
6. Install and tighten the charger air cooler outlet air hose clamp (2).
7. Connect the turbocharger pressure sensor wiring harness plug (1).
8. Connect the battery. Refer to Battery Negative Cable Disconnection and Connection (See: Starting and Charging/Battery/Battery
Cable/Negative/Service and Repair/Battery Negative Cable Disconnection and Connection).
9. Close the hood.
