chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Camshaft & Injection Pump Drive & Driven Gears Replace|Page 1598 > < Camshaft & Injection Pump Drive & Driven Gears Replace|Page 1596
Page 3
background image

slightly offset to the right when cylinder No. 1 is at TDC, Fig. 69.

3. Install timing tool J-26896, into pump adapter, Fig. 72. Using a suitable torque wrench, torque tool towards cylinder No. 1 to 50 ft. lbs. While

holding torque steady, mark pump adapter, Fig. 72. Remove tool.

4. Reinstall injection pump. Refer to "Injection Pump, Replace."

Camshaft & Injection Pump Drive & Driven Gears Replace|Page 1598 > < Camshaft & Injection Pump Drive & Driven Gears Replace|Page 1596