Equinox AWD V6-3.4L (2008)
7. Remove the heater outlet pipe nut (4) from the upper intake manifold.
8. Remove the heater outlet pipe nuts (2) and bolt (3) from the throttle body.
9. Position the heater outlet pipe out of the way without disconnecting the heater hoses.
10. Remove the exhaust gas recirculation (EGR) pipe. Refer to Exhaust Gas Recirculation Pipe Replacement .
11. Remove the positive crankcase ventilation (PCV) foul air hose. Refer to Positive Crankcase Ventilation Hose/Pipe/Tube Replacement (See:
Powertrain Management/Emission Control Systems/Positive Crankcase Ventilation/PCV Valve Hose/Service and Repair) .
12. Loosen but do not completely remove the generator attachment bolt most near the intake manifold.
