Equinox AWD V6-3.4L (2008)
Axle Beam: Service and Repair
Support Replacement (AWD Vehicles)
Tools Required
J 37043 Park Brake Cable Release Tool
Removal Procedure
1. Place the park brake lever in the release position.
2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
3. Remove the tires and wheels. Refer to Tire and Wheel Removal and Installation (See: Wheels and Tires/Service and Repair) .
4. Remove the exhaust muffler. Refer to Exhaust System Replacement (LNJ) Exhaust System Replacement (LY7) .
5. Remove the rear park brake cable routing bolts from the trailing arms.