Equinox AWD V6-3.4L (2008)
9. Install the shift control cable (2) to the shift control cable bracket (3). Ensure the shift control cable retaining tabs fully engage the shift control
cable bracket.
10. Connect the shift control cable (1) to the transaxle range switch lever (4).
11. Adjust the shift control cable. Refer to Shift Control Cable Adjustment (See: Adjustments) .
12. Install the battery tray. Refer to Battery Tray Replacement .
13. Enable the supplemental inflatable restraint (SIR) system. Refer to SIR Disabling and Enabling .
14. Release the parking brake.
Shift Control Cable Bracket Replacement
Shift Control Cable Bracket Replacement
Tools Required
J 36346 Fascia Retainer Remover
Removal Procedure
1. Remove the battery tray. Refer to Battery Tray Replacement .