Equinox AWD V6-3.4L VIN F (2006)
Firewall: Service and Repair
Plenum Panel Replacement - Upper
Removal Procedure
Caution: Refer to Approved Equipment for Collision Repair Caution in Cautions and Notices.
1. Disable the supplemental inflatable restraint (SIR) system. Refer to SIR Disabling and Enabling Zones in SIR.
2. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnect/Connect Procedure in Engine Electrical.
3. Remove all related panels and components.
4. Repair as much of the damage as possible to factory specifications. Refer to Dimensions - Body () .
5. Note the location and remove the sealers and anti-corrosion materials from the repair area, as necessary. Refer to Anti-Corrosion Treatment and
Repair () in Paint/Coatings.
Important: Do not damage any inner panels or reinforcements.
6. Locate and drill out all factory welds. Note the number and location of the welds for installation of the plenum top panel.
7. Remove the damaged plenum top panel.
Installation Procedure