Equinox AWD V6-3.4L VIN F (2006)
NOTE: Refer to Fastener Notice.
6. Remove the protective caps from the liquid line and the evaporator outlet hose.
7. Install new seal washers to the liquid line and the evaporator outlet hose.
8. Install the liquid line and the evaporator outlet hose to the TXV.
9. Install the liquid line and evaporator outlet hose retainer plate nut to the TXV.
Tighten the nut to 16 N.m (12 lb ft).
10. Evacuate and charge the A/C system. Refer to Refrigerant Recovery and Recharging.
11. Test the affected A/C joints for leaks using J 39400-A.