Express 1500 RWD V6-4.3L VIN X (2005)
Wiper Motor: Service and Repair
Wiper Motor Crank Arm Replacement
WIPER MOTOR CRANK ARM REPLACEMENT
TOOLS REQUIRED
-
J 39232 Wiper Transmission Separator
-
J 39529 Wiper Transmission Installer
REMOVAL PROCEDURE
1. Park the wiper arms.
2. Remove the wiper arms.
3. Remove the air inlet grille panels (1,2).
4. Remove the wiper motor module assembly.
5. Disconnect the wiper transmission (2) from the wiper motor crank arm (3) using the J 39232.
6. Loosen the wiper motor shaft nut (1).
7. Tap on the screw with a soft-faced mallet while holding up on the wiper motor crank arm (3) until the wiper motor crank arm is loose on wiper
motor shaft.
8. Remove the nut.
9. Remove the wiper motor crank arm from the wiper motor shaft.
INSTALLATION PROCEDURE
