Express 1500 RWD V8-5.3L VIN T (2004)
1. Install the battery positive cable to the vehicle.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Connect the battery positive cable to the auxiliary battery.
Tighten
Tighten the auxiliary battery positive cable to 15 N.m (11 lb ft).
3. Install the battery positive cable retainers to the frame.
4. Lower the vehicle.
5. Connect the battery positive cable to the junction block.
Tighten
Tighten the nut to 10 N.m (89 lb in).
6. Connect the battery negative cable to the auxiliary battery.
Tighten
Tighten the bolt to 15 N.m (11 lb ft).
7. Connect the battery negative cable to the battery.
Tighten
Tighten the bolt to 17 N.m (13 lb ft).