Express 2500 V8-6.6L DSL Turbo (2010)
Coolant Reservoir: Service and Repair
Radiator Surge Tank Replacement
Radiator Surge Tank Replacement
Removal Procedure
Special Tools
J 38185 Hose Clamp Pliers
Warning
To avoid being burned, do not remove the radiator cap or surge tank cap while the engine is hot. The cooling system will release scalding fluid and steam
under pressure if radiator cap or surge tank cap is removed while the engine and radiator are still hot.
1. Partially drain the cooling system. Refer to Cooling System Draining and Filling (Static Fill) (See: Service and Repair/Procedures/Cooling
System Draining and Filling (Static Fill)) Cooling System Draining and Filling (Vac N Fill) (See: Service and Repair/Procedures/Cooling System
Draining and Filling (Vac N Fill)) Cooling System Draining and Filling (Static Fill LGH) (See: Service and Repair/Procedures/Cooling System
Draining and Filling (Static Fill VIN L)).
2. Remove the overflow hose from the surge tank.
