Express 2500 V8-6.6L DSL Turbo (2010)
1. Place the crankshaft rear oil seal onto the crankshaft.
Note: The J 44642 must be fully secured to the crankshaft to ensure proper seal depth.
2. Install the J 44642 to the crankshaft.
3. Press the crankshaft rear oil seal into position using the J 44642. The J 44642 will bottom out when the seal reaches the proper depth.
4. Remove the J 44642.
5. Install the engine flywheel. Refer to Engine Flywheel Replacement (See: Transmission and Drivetrain/Flex Plate/Service and Repair).