Express 2500 V8-6.6L DSL Turbo (2010)
Fuel Pump Pickup Filter: Service and Repair
VIN 6
Fuel Strainer Bowl Replacement
Removal Procedure
1. Drain the fuel from the fuel filter. Refer to Water-in-Fuel Draining (See: Powertrain Management/Fuel Delivery and Air Induction/Fuel/Water
Separator/Service and Repair/Procedures).
2. Disconnect the electrical connectors.
3. Remove the diesel fuel strainer bowl assembly.
Installation Procedure
Important: The water-in-fuel sensor must ONLY be tightened by hand.