Express 2500 V8-6.6L DSL Turbo (2010)
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
1. Position the fuel rail assembly and install the 2 bolts and tighten to 25 Nm (18 lb ft).
2. Install the fuel return pipe. Refer to Fuel Return Pipe Replacement (See: Fuel Return Line/Service and Repair/Fuel Return Pipe Replacement).
3. Connect the FRT sensor electrical connector.
4. Install the left fuel injector feed pipes. Refer to Fuel Injection Fuel Feed Pipe Replacement - Left Side (See: Fuel Supply Line/Service and
Repair/Fuel Injection Fuel Feed Pipe Replacement - Left Side).
5. Install the right fuel rail fuel feed pipe. Refer to Fuel Injection Fuel Feed Front Pipe Replacement - Right Side (See: Fuel Supply Line/Service
and Repair/Fuel Injection Fuel Feed Front Pipe Replacement - Right Side).
6. Install the left fuel rail fuel feed pipe. Refer to Fuel Injection Fuel Feed Front Pipe Replacement - Left Side (See: Fuel Supply Line/Service and
Repair/Fuel Injection Fuel Feed Front Pipe Replacement - Left Side).
7. Install the A/C compressor.
8. Prime the fuel system. Refer to Fuel System Priming (See: Service and Repair/Fuel System Priming).
9. Start the engine.
If the engine does not start, repeat the above step.
10. Inspect the fuel system for fuel leaks.
