Express 2500 V8-6.6L DSL Turbo (2010)
8. Remove the 2 fuel pipe bracket bolts.
9. Disconnect the fuel feed pipe fittings from the left fuel rail.
10. Disconnect the fuel feed pipe from the right fuel rail.
11. Remove the right fuel rail fuel feed pipe.
Installation Procedure
1. Install the right fuel rail fuel feed pipe.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Connect the fuel feed pipe fittings to the left fuel rail and tighten to 41 Nm (30 lb ft).
3. Connect the fuel feed pipe to the right fuel rail and tighten to 41 Nm (30 lb ft).
4. Install the 2 fuel pipe bracket bolts and tighten to 25 Nm (18 lb ft).
5. Install the fuel pipe bracket bolt and bracket at front of engine.
6. Install the fuel rail bracket bolt under the air snorkel.
7. Position back the fuel line/wire harness at the left front side of the engine and install the bolts.
