Express 3/4 Ton Van V8-4.8L VIN V (2003)
Installation Procedure
1. Install the passenger side rear corner trim panel to the vehicle.
2. Align the tabs at the front of the passenger side rear corner trim panel.
3. Press the passenger side rear corner trim panel at the rear in order to engage the retaining clips.
Trim Replacement - Hinge Pillar
Trim Replacement - Hinge Pillar
Removal Procedure
1. Remove the knee bolster. Refer toKnee Bolster Replacement - Left (See: Dashboard / Instrument Panel/Service and Repair/Knee Bolster
Replacement - Left) for the left knee bolster panel or Knee Bolster Replacement - Right (See: Dashboard / Instrument Panel/Service and
Repair/Knee Bolster Replacement - Right) for the right panel.
2. Gently pull the hinge pillar trim panel in order to release the retaining clips.
3. Remove the hinge pillar trim from the vehicle.
4. Inspect the hinge pillar trim panel for broken or missing retaining clips. Replace the retaining clips as needed.
Installation Procedure
