Express 3/4 Ton Van V8-4.8L VIN V (2003)
15. Remove the power steering pump rear bracket mounting nuts.
16. Remove the power steering pump rear bracket from the power steering pump.
Installation Procedure
1. Install the power steering pump rear bracket to the power steering pump.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the power steering pump rear bracket mounting nuts.
Tighten the nuts to 50 Nm (37 ft. lbs.).
3. Install the power steering pump to the vehicle.
4. Install the front power steering pump mounting bolts.
Tighten the bolts to 50 Nm (37 ft. lbs.).
5. Install the rear power steering pump mounting bolt.
Tighten the bolt to 41 Nm (30 ft. lbs.).
6. Uncap the power steering hoses.