Express 3500 V8-6.6L DSL Turbo (2008)
10. Install the EGR cooler pipe hose to the EGR cooler tube and Reposition the EGR cooler pipe clamp (1) .
11. Position the transmission fill tube.
12. Install the transmission fluid fill tube to bell housing nut.
Tighten the nut to 18 N.m (13 lb ft).
13. Install the EGR cooler pipe bolt.
Tighten the bolt to 9 N.m (80 lb in).
14. Fill the cooling system. Refer to Cooling System Draining and Filling (Static Fill) (See: Cooling System/Service and Repair)Cooling System
Draining and Filling (Vac N Fill) (See: Cooling System/Service and Repair) .
15. Install the engine cover. Refer to Engine Cover Replacement .
