Express 3500 V8-6.6L DSL Turbo (2008)
Installation Procedure
Notice: Refer to Fastener Notice.
1. Install the FRT sensor electrical connector.
Tighten the FRT sensor to 22 N.m (16 lb ft).
2. Connect the FRT sensor electrical connector.
3. Install the fuel line retainer center of engine.
4. Install the rear fuel line retainer.
5. Install the charged air inlet tube.
6. Install the glow plug module and bracket.
7. Prime the fuel system. Refer to Fuel System Priming.
8. Once engine starts, inspect for leaks.
9. Install the engine cover.
