G 1500 1/2 Ton Van V6-4.3L VIN W (1997)
CAUTION: Do not use vehicle power to rotate the wheel while sanding to avoid personal injury.
3. Re-coat the wheels.
a. Clean from the surface any contaminants by washing with soap and water.
b. Spray the wheel with Amchem #33 or equivalent and let soak 1 to 3 minutes.
c. Rinse with water and blow dry.
d. Mask the tire off.
e. Finish with Ditzler Delclear acrylic urethane and Ditzler Ultras urethane additive or equivalent. Three coats:
-
1st coat (Light mist coat, let flash).
-
2nd coat (Light, let flash).
-
3rd coat (Heavy, double wet coat).
f.
Let dry for 24 hours or if necessary, flash for 30 minutes, force dry at 60°C (140°F) for 30 minutes, and allow to cool for 30 minutes before
mounting.
g. Re-balance the tire and wheel assembly by replacing the original balance weights with nylon coated weights.
h. Mount the weights in the marked positions and remove the masking from the tire.
Description
Aluminum wheels should be cleaned and waxed regularly. Do not use abrasive cleaners, as they could damage the protective coating.
