G 1500 1/2 Ton Van V6-4.3L VIN W (1997)
Shift Cable: Service and Repair
REMOVE OR DISCONNECT
^
Apply the parking brake.
^
Position the steering column shift lever to park.
^
Prior to removing the shift cable from the vehicle, ensure that the transmission is in the mechanical park position. The transmission control lever
can be positioned to mechanical park by rotating the control lever clockwise until it reaches its full clockwise stop position.
1. Clip Securing the shift cable to the steering column bracket.
2. Shift cable from the steering column shift control.
3. Rubber grommet from the floor panel.
4. Raise and support the vehicle.
5. Shift cable clips from the engine and transmission brackets.