HHR L4-2.2L (2007)
10. Install the positive/negative battery cable clip (6) to the ECM/TCM bracket.
11. Install the positive/negative ground terminal (4) to the tie bar stud.
12. Install the positive/negative ground nut (3) to the tie bar stud.
13. Install the positive/negative battery cable terminal (2) to the junction block terminal stud.
14. Install the junction block terminal nut (1).
Tighten the nut to 15 N.m (11 lb ft).
15. Close the junction block terminal cover.
16. Connect the negative battery cable.
