HHR L4-2.4L (2010)
7. Remove the spacer plate support bolts (20) and remove the spacer plate support (21).
Note: Checkballs may fall out of the channel plate assembly. Retain the checkballs with petroleum jelly.
8. Remove the spacer plate (90) with the spacer plate filter attached.
9. Remove and discard the spacer plate assembly (90).
Disassembly/Assembly Procedure
For step by step instructions on how to disassemble/assemble the control valve body, refer to Control Valve Body Disassemble (See: Service and
Repair/Overhaul/94. Control Valve Body Disassemble) and Control Valve Body Assemble (See: Service and Repair/Overhaul/95. Control Valve Body
Assemble).
Installation Procedure
1. Make sure the checkballs (1-7) are in the proper locations on the channel plate. Retain the checkballs with petroleum jelly.
