Impala V6-3.8L SC VIN 1 (2005)
23. Install the top case side cover bolt.
Tighten bolts to 25 Nm (18 ft. lbs.).
24. Install the shift cable to the shift lever and transaxle shift cable bracket bolts to shift cable bracket.
Tighten bolts to 30 Nm (22 ft. lbs.).
25. Connect the transaxle wiring harness connector, and harness retainer to side cover stud.
26. Install the engine mount struts.
27. Install the accelerator cable bracket with the accelerator and cruise control cables.
28. Install the air induction duct.
29. Install the engine dress cover.
Notice: Refer to Do Not Overfill the Transmission Notice in Service Precautions.
30. Check and fill the transaxle as necessary.
31. Inspect for fluid leaks.
