chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Campaign - Automatic Transaxle Channel Plate Distorted|Page 4781 > < Campaign - Automatic Transaxle Channel Plate Distorted|Page 4779
Page 3
background image

necessary to complete this campaign. Any dealer not receiving a computer listing with the campaign bulletin has no involved vehicles currently assigned.

OWNER NOTIFICATION

Owners will be notified of this campaign on their vehicles by Chevrolet Motor Division (see copy of owner letter included with this bulletin).

DEALER CAMPAIGN RESPONSIBILITY

All unsold new vehicles in dealers' possession and subject to this campaign must be held and inspected/repaired per the service procedure of this
campaign bulletin before owners take possession of these vehicles.

Dealers are to service all vehicles subject to this campaign at no charge to owners, regardless of mileage, age of vehicle, or ownership, from this time
forward.

Owners of vehicles recently sold from your new vehicle inventory with no owner information indicated on the dealer listing, are to be contacted by the
dealer, and arrangements made to make the required correction according to the instructions contained in this bulletin. This could be done by mailing to
such owners a copy of the owners letter accompanying this bulletin. Campaign follow-up cards should not be used for this purpose, since the owner may
not as yet have received the notification letter.

In summary, whenever a vehicle subject to this campaign enters your vehicle inventory, or is in your dealership for service in the future, please take the
steps necessary to be sure the campaign correction has been made before selling or releasing the vehicle.

PARTS INFORMATION

Parts required to complete this campaign are to be obtained from General Motors Service Parts Operations (GMSPO). These parts must be ordered on a
"V.I.P." order. V.I.P. charges will be waved by GMSPO.

NOTICE: 

Vehicle VIN must be included on the V.I.P. Order.

SERVICE PROCEDURE

1.

Replace transaxle assembly. See 1993 Lumina service manual (section 7A) for transaxle removal and replacement procedures.

2.

Crate removed transaxle in original shipping container and return in usual manner with appropriate information included.

3.

Install Campaign Identification Label.

CAMPAIGN IDENTIFICATION LABEL

Each vehicle corrected in accordance with the instructions outlined in this Product Campaign Bulletin will require a "Campaign Identification Label".
Each label provides a space to include the campaign number and the five (5) digit dealer code of the dealer performing the campaign service. This
information may be inserted with a typewriter or a ball point pen.

Each "Campaign Identification Label" is to be located on the radiator core support in an area which will be visible when the vehicle is brought in for
periodic servicing by the owner. Additional "Campaign Identification Labels" can be obtained from DAC.

Apply "Campaign Identification Label" only on a clean, dry surface.

Campaign - Automatic Transaxle Channel Plate Distorted|Page 4781 > < Campaign - Automatic Transaxle Channel Plate Distorted|Page 4779