chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Campaign - Automatic Transaxle Channel Plate Distorted|Page 4779 > < A/T Control - DTC P0756 Diagnostic Tips
Page 1
background image

Technical Service Bulletin # 93C19

Date: 930701

Campaign - Automatic Transaxle Channel Plate Distorted

Number: 93C19

Section:  7A

Date: July, 1993

SUBJECT:  
PRODUCT CAMPAIGN 93C19 - AUTOMATIC TRANSAXLE 4T60-E

MODELS:  
1993 CHEVROLET LUMINA

To: All Chevrolet Dealers

General Motors has determined that certain 1993 Chevrolet Lumina model vehicles equipped with 4T60-E automatic transaxles (RPO M13) may contain
a distorted channel plate assembly. The suspect channel plate may be bowed, affecting the transaxle "end play". This could result in a variety of
symptoms including noise, fluid leaks and eventually loss of forward drive capability.

To prevent the possibility of these conditions occurring, dealers are to replace the transaxle assembly with a new transaxle assembly.

VEHICLES INVOLVED

Involved are certain 1993 Chevrolet Lumina motor vehicles equipped with 4T60-E automatic transaxles (RPO M13) built within the shown VIN
breakpoints:

Campaign - Automatic Transaxle Channel Plate Distorted|Page 4779 > < A/T Control - DTC P0756 Diagnostic Tips