Lumina V6-3100 3.1L VIN M SFI (1995)
Inside Handle Bezel
Remove or Disconnect
1. Screw.
2. Bezel.
3. Electrical connector.
Install or Connect
1. Electrical connector.
2. Position bezel to trim panel.
3. Screw.
Tighten
^
Screw to 1.9 N.m (17 lb. in.).
Coupe
Power Window Switch Assembly
NOTICE: When removing a door trim panel or switch plate, the ignition switch must be in the "OFF" position. This will eliminate the possibility of
shorting out the switch if a screwdriver, awl or metal object is used to remove the switch from the harness.