Luv 2WD L4-110 1800cc (1982)
^
Check timing chain for wear or damage; replace as necessary. Measure distance (L) with chain stretched with a pull of approximately 98 N (22
lbs.) as shown in image. Standard (L) value is 381mm (15.00"); replace chain if (L) is greater than 385mm (15.16").
^
Remove attaching bolt and remove automatic chain adjuster.
^
Check that the shoe becomes locked when shoe is pushed in with the lock lever released.
^
Check that lock is released when the shoe is pushed in. The adjuster assembly must be replaced if rack teeth are found to be worn excessively;
^
Remove "E" clip and remove chain tensioner. Check tensioner for wear or damage; replace as necessary.
^
Inspect tensioner pin for wear or damage. If replacement is necessary, remove pin from cylinder block using locking pliers. Lubricate NEW