chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

ABOUT US
Engine Coolant Crossover Pipe Replacement|Page 2091 > < Engine Coolant Crossover Pipe Replacement|Page 2089

Malibu L4-2.4L (2010)

Page 3
background image

13. Remove the coolant crossover pipe bolts (1-4).
14. Remove the coolant crossover pipe.

Installation Procedure

1. Position the coolant crossover pipe to the cylinder heads.

Caution:  Refer to Fastener Caution   (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).

2. Install the coolant crossover pipe bolts (1-4) and tighten to 50 Nm (37 lb ft).

Engine Coolant Crossover Pipe Replacement|Page 2091 > < Engine Coolant Crossover Pipe Replacement|Page 2089