Malibu Classic L4-2.2L (2008)
16. Install the second radiator shelf tube (J 28467-2A) through the passenger side cross bracket assembly (J 28467-1A) on the top of the strut tower
tube (J 28467-3).
17. Place the rubber padded foot of the front support assembly (J 28467-4A) on the vehicle radiator shelf. The foot position used in the front support
assembly (J 28467-4A) depends on the vehicle application.
18. Install the 7/16 inch x 2.0 inch quick release pin (J 28467-9) through the hole in the front support assembly (J 28467-4A) in order to level the
radiator shelf tube (J 28467-2A). The hole used in the front support assembly (J 28467-4A) depends on the vehicle application.
19. Install the lift hook (J 28467-7A) through the lift hook bracket (J 28467-6A).
20. Install the 1/2 inch lift hook washer and lift hook wing nut (J 28467-34) onto the lift hook (J 28467-7A).
21. Install the assemblage lift hook bracket (J 28467-6A) over the radiator shelf tube (J 28467-2A).
22. Adjust the radiator shelf tube (J 28467-2A) and the assemblage lift hook bracket (J 28467-6A) in order to align the hook with the right (rear), front
of engine, lift hook bracket located next to the generator.
23. Hand tighten the passenger side cross bracket assembly (J 28467-1A) wing nuts.
24. Hand tighten the lift hook wing nuts (J 28467-34) securely to remove all slack from the engine support fixture assembly.
