Metro L3-061 1.0L VIN 6 TBI (1998)
Evaporator Core: Service and Repair
Removal Procedure
1. Discharge and recover the refrigerant.
Disable the supplemental inflatable restraint (SIR) system.
2. Disconnect the negative battery cable.
3. Remove the blower case.
4. Disconnect the air conditioning (A/C) compressor control module electrical connector.
5. Disconnect the refrigerant temperature sensor electrical connector.
6. Remove the refrigerant inlet and the outlet pipes from the evaporator case (1).
7. Remove the drain hose (7) from the evaporator case.
8. Remove the following items from the vehicle:
^
Two mounting bolts (2)
^
One nut (3)
^
The evaporator case