Monte Carlo V6-3.4L VIN E (2000)
Sunroof / Moonroof Weatherstrip: Service and Repair
Sunroof Glass Panel Seal Replacement
REMOVAL PROCEDURE
1. Remove the sunroof glass panel.
2. Remove the sunroof glass seal from the sunroof glass panel frame by pulling the sunroof glass seal away at one point and continuing around the
perimeter of the sunroof glass panel frame.
3. Wipe the perimeter of the sunroof glass panel frame area with a clean, dampened cloth using window cleaner GM P/N 1050427, Canadian P/N
992727, or isopropyl alcohol in order to clean the surface of the perimeter of the sunroof glass panel frame.
Allow to air dry.
INSTALLATION PROCEDURE
1. Position the sunroof glass panel seal onto the sunroof glass panel frame.
IMPORTANT: Ensure that the sunroof glass seal is properly seated around the entire perimeter of the sunroof glass panel frame.
2. Firmly press the sunroof glass seal into place. A small rubber hammer will help in the installation.
3. Install the sunroof glass panel.